Safety Tips

5 Essential Electrical Safety Checks for Homeowners

March 12, 2025 Robert Hayes 6 min read
Electrician checking panel

Electrical safety is often out of sight, out of mind – until something goes wrong. Taking a few minutes each season to perform simple checks can prevent fires, shocks, and costly repairs. Here are five essential safety checks every homeowner should know.

1. Inspect Cords and Outlets

Walk through your home and look at every power cord and outlet. Frayed cords, cracked plugs, or loose outlets are fire hazards. If an outlet feels warm to the touch, or if you see discoloration, call a professional immediately. Also, never use an extension cord as permanent wiring – it's a common code violation and safety risk.

2. Test Your GFCIs

Ground Fault Circuit Interrupters (GFCIs) are required in kitchens, bathrooms, garages, and outdoors. They protect against shock. Press the "TEST" button – the "RESET" button should pop out. If it doesn't, the outlet needs replacement. Reset by pressing "RESET" firmly. Do this monthly.

“According to the Electrical Safety Foundation, GFCIs have reduced the risk of electrocution by over 70% since their introduction.”

3. Check Your Electrical Panel

Your breaker panel should never feel hot. Listen for buzzing or crackling sounds – those indicate loose connections or failing breakers. If you have an old fuse box or a panel with known safety issues (like Federal Pacific), consider an upgrade. Also, ensure the area around the panel is clear and easily accessible.

4. Test Smoke and CO Alarms

Working smoke and carbon monoxide alarms are your last line of defense. Press the test button monthly. Replace batteries at least once a year (or use 10-year sealed units). Alarms themselves should be replaced every 10 years.

5. Look for Overloaded Circuits

If lights flicker when you turn on an appliance, or breakers trip frequently, you may have an overloaded circuit. This is especially common in older homes with modern electronics. Consider having a licensed electrician add new circuits or perform a load calculation.

By staying vigilant and addressing small issues early, you protect your home and family. If you're unsure about any of these checks, VoltEdge is always here to help – schedule an inspection today.

Robert Hayes
Robert Hayes

Master Electrician and Safety Specialist at VoltEdge. With over 15 years in the field, Robert is passionate about educating homeowners on electrical safety and code compliance.

3 Comments

Sarah M.
Sarah Mitchell
March 13, 2025 at 9:23 am

Great tips! I just tested my GFCIs and one failed. Called VoltEdge and they replaced it within two hours. Highly recommend!

Reply
Mike T.
Mike Thompson
March 12, 2025 at 4:15 pm

I never thought about the panel buzzing. I'll have to check mine. Thanks for the reminder!

Reply
Linda
Linda Hayes
March 12, 2025 at 10:05 am

Great article, Robert! I'll be sharing this with my clients.

Reply
Leave a Comment

Contact VoltEdge

Have questions about electrical safety? Our team is ready to help.

Reach Out

Office

1240 Electric Ave, Suite 300
Austin, TX 78701

Phone

+1 800 555 1234
+1 800 555 5678 (emergency)

Email

hello@voltedge.com
support@voltedge.com

Hours

Mon–Fri: 7am–6pm
Emergency: 24/7

Send a message